Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

DHCP (Dynamic Host Configuration Protocol) Server
Left running head:
Chapter name (automatic)
950
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SERVICE DHCP ENABLE
service dhcp enable
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
enable the DHCP service on the OmniAccess 5740 USG.
Note: Enabling DHCP service on OmniAccess 5740 USG disables DHCP relay.
PARAMETERS
DEFAULT VALUE
By default, DHCP service is disabled.
EXAMPLE
ALU(config)# service dhcp enable
SERVICE DHCP DISABLE
service dhcp disable
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
disable the DHCP service on the OmniAccess 5740 USG.
PARAMETERS
DEFAULT VALUE
By default, DHCP service is disabled.
EXAMPLE
ALU(config)# service dhcp disable
Parameter Description
enable Enable the DHCP service.
Parameter Description
disable Disable the DHCP service.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English