Alcatel-Lucent OmniAccess 5740 - Router Ospf

router ospf
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
651
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
ROUTER OSPF
router ospf <process-id> [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Configuration Mode. This command enables
OSPF routing, and associates the OSPF instance with the specified VRF. If the
VRF name is not specified, then the OSPF instance is associated with the Default
VRF.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# router ospf 1 vrf ALU-vrf
ALU(config-router ospf 1)#
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
process-id Internally used identification parameter
for an OSPF routing process. It is locally
assigned and can be any positive
integer. A unique value should be
assigned for each OSPF routing
process.
vrf-name The name of the VRF for which the
OSPF instance is to be associated.