Alcatel-Lucent OmniAccess 5740 - Subject-Name; Transform Set

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
802
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SUBJECT-NAME
subject-name <subject-name>
DESCRIPTION
This command is entered in the ca-identity Mode. This command specifies the
subject distinguished name that would appear in the certificate request for this
CSR, if generated on the OmniAccess 5740 USG.
PARAMETER
EXAMPLE
ALU(config-ca-ALUCA)#subject-name /CN=Bart Simpson/O=ALU/C=US
TRANSFORM SET
transform-set <name>
DESCRIPTION
This command is entered in the Crypto Map Configuration Mode. This command
attaches a transform-set to a crypto map.
PARAMETER
DEFAULT VALUE
If no transform-set is attached to a crypto map, by default, ‘Default’ transform-set
is used.
EXAMPLE
ALU(config-crypto-map-exampleMap)# transform-set netset
Parameter Description
subject-name The name for a Certificate Signing
Request.
Parameter Description
name Name of the transform set.