Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

T1E1 Line Card
Left running head:
Chapter name (automatic)
238
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
ENCAPSULATION
encapsulation {frame-relay|ppp|hdlc|mlfr <bundle_id>|mlppp
<bundle_id>}
DESCRIPTION
This command is entered in the Interface Configuration Mode to set encapsulation
on the interface.
PARAMETERS
DEFAULT VALUE
Default is HDLC.
EXAMPLE
The following example shows how to set the FR encapsulation:
ALU(config-if serial 0/0:0)# encapsulation frame-relay
Parameter Description
frame-relay Framerelay.
ppp Point to Point Protocol.
hdlc High Level Data Link Control.
mlfr <bundle_id> The Multi-link Frame Relay bundle
interface that is identified by the bundle
ID.
mlppp <bundle_id> The Multi-lin Point-Point Protocol bundle
interface that is identified by the bundle
ID.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English