bgp bestpath compare-cluster-length
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
495
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
BGP BESTPATH COMPARE-CLUSTER-LENGTH
bgp bestpath compare-cluster-length
DESCRIPTION
This command is entered in the Router Configuration Mode. This command is
used to compare the cluster-length for identical paths.
PARAMETERS
None.
DEFAULT VALUE
Cluster-length is not compared for choosing the best path.
EXAMPLE
ALU(config-router bgp AS30)#bgp bestpath compare-cluster-length
BGP BESTPATH COMPARE-ROUTERID
bgp bestpath compare-routerid
DESCRIPTION
This command is entered in the Router Configuration Mode. This command can
be used to compare similar routes received from BGP peers during the best path
selection process and switch the best path to the route with the lowest router ID.
PARAMETERS
None.
DEFAULT VALUE
None.
EXAMPLE
ALU(config-router bgp AS30)# bgp bestpath compare-routerid
To Next Page
Loading...
Need help?
General
