synchronization
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
547
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SYNCHRONIZATION
synchronization
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command is used to enable the synchronization between the BGP and IGP
system.
PARAMETERS
None.
DEFAULT
Enabled.
EXAMPLE
ALU(config-router bgp AS30)# synchronization
Up/Down The length of time that the BGP session has been in the
Established state, or the current state if it is not Established.
State/PfxRcd Current state of the BGP session/the number of prefixes the
router has received from a neighbor or peer group. When
the maximum number (as set by the
neighbor_maximum_prefix command) is reached, the string
"PfxRcd" appears in the entry, the neighbor is shut down,
and the connection is Idle.
An (Administrator) entry with Idle status indicates that the
connection has been shut down using the
neighbor_shutdown command.
Field Description
To Next Page
Loading...
Need help?
General
