crypto key import rsa name
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
767
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
CRYPTO KEY IMPORT RSA NAME
crypto key import rsa <name> {<RSA-keypair>|fpkey <file-
path>|ftp:|tftp:|http:|https:|scp:}
DESCRIPTION
This command is entered in the Configuration Mode. This command imports an
RSA key pair from a remote location.
You also have an option to directly enter or paste the keys after the command.
Enter upto 80 characters on a line. Enter a blank line to exit.
Note: Currently, SCP option is not supported.
PARAMETERS
EXAMPLE
ALU(config)# crypto key import rsa testKey ftp:
CRYPTO NAT-TRAVERSAL
crypto nat-traversal {enable|disable}
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
enable or disable NAT traversal for IPsec on the OmniAccess 5740 USG.
PARAMETERS
None.
DEFAULT VALUE
By default, NAT Traversal is enabled.
EXAMPLE
ALU(config)# crypto nat-traversal disable
Parameter Description
name Name of the RSA key pair.
RSA-keypair Directly enter or paste the keys after the
command.
fpkey <file-path> FPkey file path. To copy the certificate
into the front panel USB memory.
To Next Page
Loading...
Need help?
General
