ip nhrp
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
815
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP NHRP
ip nhrp <object-name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a NHRP (Next Hop Routing Protocol) object.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip nhrp alu-dmvpn
ALU(config-nhrp-alu-dmvpn)#
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
object-name Name of the NHRP object.
To Next Page
Loading...
