Alcatel-Lucent OmniAccess 5740 - Show Ip Nat Statistics <Interface-Name

Network Address Translation
Left running head:
Chapter name (automatic)
688
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP NAT STATISTICS <INTERFACE-NAME>
show ip nat statistics <interface-name> {in|out|both}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays NAT statistics for a specific interface.
PARAMETERS
EXAMPLE
The following example shows NAT statistics on a specified interface:
ALU# show ip nat statistics GigabitEthernet3/0 Out
ip nat n1
Dropped: 0, Bypassed: 0, Enqueued: 0
10 match any m1 source-nat host 1.1.1.1
NATted Packets: 0
20 match any m2 source-nat host 1.1.1.2
NATted Packets: 0
interface GigabitEthernet3/0 out
Parameter Description
interface-name Name of the interface.
in "in" means ingress traffic.
out "out" denotes that egress traffic.
both Implies both ingress and egress traffic.