Alcatel-Lucent OmniAccess 5740 - Ip Route

ip route
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
433
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP ROUTE
ip route {vrf <name>|destination network subnet-
mask|destination network/prefix-length} {<gateway-ip-
address>|<interface-name> [<gateway-ip-address>]}[<1-255>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a static route.
PARAMETERS
DEFAULT VALUE
By default, no static route is configured.
EXAMPLE
ALU(config)# ip route 1.1.1.1/24 2.2.2.2
Parameter Description
vrf <name> Name of the VRF.
{destination
network subnet-
mask|destination
network/prefix-
length}
The IP address and prefix length of the destination.
gateway-ip-
address
IP address of the next hop.
interface name Name of the next hop interface.
1-255 An administrative distance of the route.