Filter and Firewall
Left running head:
Chapter name (automatic)
726
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PORT-SCAN
port-scan [threshold <1-4294967295> <1-4294967295>]
DESCRIPTION
This command is entered in the Firewall-Attack Sub Configuration Mode. This
command is used to configure port-scan attack for an attack object.
PARAMETERS
DEFAULT
The deafult is 5 packets in 1000 milliseconds.
EXAMPLE
ALU(config-firewall-attack-A1)# port-scan
RENUMBER
renumber
DESCRIPTION
This command is entered in the Firewall Configuration Mode. Use this command
to generate a numbering scheme for the firewall policy rules configured.
PARAMETERS
None
EXAMPLE
ALU(config-firewall-P1)# renumber
Parameter Description
threshold Threshold limit set.
<1-4294967295> <1-4294967295> Number of packets permissible within a
defined interval.
To Next Page
Loading...
