Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

ip ddns update method
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
989
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP DDNS UPDATE METHOD
ip ddns update method <ddns-method>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to attach the DDNS method on an interface. The specified DDNS method is
used for sending DDNS updates associated with address changes on this
interface.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# interface Serial 0/0
ALU(config-if Serial0/0)# ip ddns update method myDdnsObj
DDNS method applied.
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
ddns-name DDNS method to be attached on the
interface.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English