Alcatel-Lucent OmniAccess 5740 - Debug Frame-Relay; Debug Frame-Relay All

Frame Relay
Left running head:
Chapter name (automatic)
278
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DEBUG FRAME-RELAY
debug frame-relay {fse|keepalive|mlfr} [{output {all|log|vty
{<1-256>|all|console|this}}]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows the debug FR Full Status/Keepalive messages.
PARAMETERS
DEFAULT VALUE
By default, debug is disabled.
EXAMPLE
ALU(config)# debug frame-relay fse
DEBUG FRAME-RELAY ALL
debug frame-relay all [detail-level <1-9>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows all the debug messages pertaining to FR functionality.
PARAMETERS
DEFAULT VALUE
By default, debug is disabled.
EXAMPLE
ALU(config)# debug frame-relay all
Parameter Description
output all Output to all possible locations.
output log Output to system log.
output vty Output to VTY.
Parameter Description
all Displays all the debug messages
pertaining to FR functionality.
detail-level Displays detail level (default is 1).
1-9 Enable with specific detail level.