Alcatel-Lucent OmniAccess 5740 - Ip Vrf

Virtual Routing and Forwarding
Left running head:
Chapter name (automatic)
648
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IP VRF
ip vrf <vrf-name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a VRF. This enters the VRF Configuration mode.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip vrf ALU-vrf
ALU(config-vrf)#
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
vrf-name The name of the VRF to be created.