Alcatel-Lucent OmniAccess 5740 - Clear Ip-Policy Statistics; Ip-Policy

Policy Based Routing
Left running head:
Chapter name (automatic)
632
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLEAR IP-POLICY STATISTICS
clear ip-policy statistics [<ip-policy name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command clears the statistics of all the IP policies configured in the system.
PARAMETERS
EXAMPLE
ALU(config)# clear ip-policy statistics
IP-POLICY
ip-policy <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
create an IP policy.
PARAMETERS
EXAMPLE
ALU(config)# ip-policy pbr1
ALU(config-ip-policy-pbr1)#
Parameter Description
name Clears the statistics for the specified IP
policy.
Parameter Description
name Name for the IP policy being configured.