IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
838
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SAVE-PASSWORD
save-password {No|Yes}
DESCRIPTION
This command is entered in the Client Object Configuration Mode. This command
is used to enable or disable the client to save password.
PARAMETERS
DEFAULT VALUE
By default, save password is set to No.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-client-obj-myclientobject)# save-password yes
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
No This option allows the client to save
password. When this option is
configured, the “Save password” field on
the client is enabled and client can save
the password, and does not have to
enter the password for every login.
Yes This option does not allow the client to
save password. When this option is
configured, the “Save password” field on
the client will be grayed out and client
has to enter the password every time.
To Next Page
Loading...
Need help?
General
