Router Information Protocol
Left running head:
Chapter name (automatic)
482
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP RIP DATABASE
show ip rip database [<ip-prefix>|<ip-address/prefix-
length>|vrf <vrf-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays all route entries in the RIP routing database.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU# show ip rip database
RIP Route Table
---------------
1.0.0.0/8 : auto-summary
1.1.1.0/24 : directly connected, GigabitEthernet3/0
10.0.0.0/8 : auto-summary
10.91.2.0/24: directly connected, GigabitEthernet3/1
12.0.0.0/8 : learnt via RIP, metric = 1 tag = 0 via 10.91.2.5,
00:00:00 ago, on GigabitEthernet3/1
ALU#
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Parameter Description
ip-prefix>|<ip-
address/prefix-
length>
Displays the routing information for the specified IP address
with mask or prefix length.
vrf-name
Name of the VRF.
To Next Page
Loading...
Need help?
General
