Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

show ip protocols
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
481
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Gateway Interface Distance Last Update
1.1.1.1 GigabitEthernet3/1 115 00:00:00
Distance: (default is 120)
Field Description
Routing Protocol is
“rip”
Specifies the routing protocol used.
Sending updates
every 30 seconds
Specifies the time between sending updates.
next due in 2 seconds The precise time when the next update is due to be sent.
Invalid after 180
seconds
Specifies the value of the invalid parameter.
holddown for 180 Specifies the current value of the holddown parameter.
flushed after 240 Specifies the time (in seconds) after which the individual
routing information will be flushed out.
Outgoing update filter
list is not set for all
interfaces
Specifies whether the outgoing filtering list has been set.
Incoming update filter
list is not set for all
interfaces
Specifies whether the incoming filtering list has been set.
Redistributing Lists the protocol that is being redistributed.
Default version
control
Specifies the version of RIP packets that are sent and
received.
Routing for Networks Specifies the networks for which the routing process is
currently injecting routes.
Routing Information
Sources
Lists all the routing sources that the software is using to
build its routing table. For each source, you will see the
following displayed:
• IP address
• Administrative distance
• Time the last update was received from this source

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English