Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
68
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
LOGGING CONSOLE
logging console [<0-7>|alerts|critical|debugging|emergencies|
errors|informational|notifications|warnings]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
display the log messages of the specified priority and higher on the console.
PARAMETERS
EXAMPLE
ALU(config)# logging console 5
LOGGING ON
logging on
DESCRIPTION
This command is entered in the Configuration Mode. This enables logging of
messages.
PARAMETERS
None.
DEFAULT VALUE
By default, logging of messages is enabled.
EXAMPLE
ALU(config)# logging on
Parameter Description
0-7 Priority level of the messages.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English