Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

DHCP (Dynamic Host Configuration Protocol) Server
Left running head:
Chapter name (automatic)
928
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IP DHCP OPTION DOMAIN-NAME
ip dhcp option domain-name <name> [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the domain name to be used by the clients.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip dhcp option domain-name alu
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Parameter Description
name Domain name to be used by the clients.
vrf-name If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English