Alcatel-Lucent OmniAccess 5740 - Show Ip Bgp Peer-Group

show ip bgp peer-group
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
659
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP BGP PEER-GROUP
show ip bgp peer-group [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the information about the given peer group.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show ip bgp peer-group
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
vrf-name If the VRF name is specified, it displays
the information about the given peer
group for the specified VRF.