EasyManua.ls Logo

Alcatel-Lucent OmniAccess 5740 - Ethernet

Alcatel-Lucent OmniAccess 5740
1043 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Common Classifiers
Left running head:
Chapter name (automatic)
400
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
ETHERNET
ethernet {any|mac <source-mac-address>} {any|mac <destination-
mac-address>} [priority <0-7>|vlan-id <1-4094>}
DESCRIPTION
This command is entered in the Match-list Configuration Mode. This command is
used to configure rule based on Ethernet parameters.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-match-list-m1)# ethernet mac 1122.aabb.55ff any
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
source-mac-
address
Specify the source MAC address.
destination-mac-
address
Specify the destination MAC address.
0-7 Priority value.
1-4094 VLAN ID.

Table of Contents

Other manuals for Alcatel-Lucent OmniAccess 5740

Related product manuals