Open Shortest Path First
Left running head:
Chapter name (automatic)
596
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP OSPF REQUEST-LIST
show ip ospf [<1-65535>] request-list [neighbor-router-
id][<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to display a list of all LSAs requested by a router.
PARAMETERS
EXAMPLE
ALU# show ip ospf request-list
OSPF Router with ID (1.1.1.2) (Process ID 1)
Neighbor 6.6.6.6, interface GigabitEthernet 3/1 address
2.2.2.2
Type LS ID ADV RTR Seq NO Age
Checksum
1280 192.175.142.0 1.1.1.1 0x80000003 774 0x9FFB
1280 192.175.206.0 1.1.1.1 0x80000003 774 0xDC7E
1280 192.175.15.0 1.1.1.1 0x80000003 774 0x1A01
ALU#
Parameter Description
1-65535 Process ID. If this argument is included, only
information for the specified routing process
is displayed.
neighbor-router-id Neighbor router ID.
Displays the list of all LSAs requested by the
router on this interface from this neighbor.
interface-name Displays the list of all LSAs requested by the
router from the specified interface.
To Next Page
Loading...
Need help?
General
