show eth-cfm mep - 2dm-test-results
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
369
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW ETH-CFM MEP - 2DM-TEST-RESULTS
show eth-cfm mep <1-8191> domain <0-65535> association <0-
65535> 2DM-test-results remote-peer-mac <mac-address>
DESCRIPTION
This is entered in the Super User Mode or Configuration Mode. This command
displays the MEP, MA's, MD's, result of the two-way delay test.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show eth-cfm mep 10 domain 100 association 100 2DM-test-results
remote-peer-mac 00e0.b1b2.539c
------------------------------------------------------------------------
2DM Test Result
------------------------------------------------------------------------
PEER MAC Delay(microseconds) Variation(microseconds)
00:e0:b1:b2:53:9c 10000 10000
------------------------------------------------------------------------
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
1-8191 An integer, unique over a given MA,
identifying a specific MEP.
domain <0-65535> An unique integer identifying a specific
maintenance domain.
association <0-65535> An unique integer identifying a specific
maintenance association.
mac-address MAC address for a MEP on the remote
peer.
To Next Page
Loading...
Need help?
General
