Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

DHCP (Dynamic Host Configuration Protocol) Server
Left running head:
Chapter name (automatic)
936
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IP DHCP OPTION TIME-OFFSET
ip dhcp option time-offset <1-315360000> [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
determine the time variation from GMT (in seconds).
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip dhcp option time-offset 100
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Parameter Description
1-315360000 Time variation in seconds.
vrf-name If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English