Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

ip as-path access-list
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
429
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP AS-PATH ACCESS-LIST
ip as-path access-list <1-199> {deny|permit} <regular-
expression>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure AS-path Access-list.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
In the following example, the ‘ip as-path access-list’ command creates an as-path
access list named '1' to deny only those routes that include paths from or through
autonomous systems 100:
ALU(config)# ip as-path access-list 1 deny _100_
Parameter Description
1-199 Number that indicates the regular expression access list
number.
deny Denies access for matching conditions.
permit Permits access for matching conditions.
regular-
expression
Regular expression.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English