url
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
995
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
URL
url <url>
DESCRIPTION
This command is entered in the DDNS HTTP Configuration Mode. This command
is used to configure DDNS URL to be invoked for host name and IP address
mapping. The URL is provided by the service provider.
Note: 1. When URL and the server configuration both exists, URL configuration is
considered to update the DDNS server.
2. The URL for HTTPS should be provided in the following way: For e.g., ‘https://
userid:password@members.dyndns.org/nic/update?system=dyndns&hostname=<h>
&myip=<a>.
‘Userid’ is the user name and ‘password’ is the password at the DynDNS.org web site.
The special character strings <h> and <a> will be substituted with the host name to
update and the IP address with which that host name should be associated,
respectively.
Before entering the question mark (?) character, press ‘Ctrl + v’. This will allow you to
enter the ‘?’ without the CLI interpreting the ‘?’ as a help query. And, press ‘Ctrl + d’ to
return to normal mode.
3. To use HTTPS URL, it is mandatory to download certificates from the Certificate
Authority using certificate commands.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config–ddns-HTTP)# url https://test:test@members.
dyndns.org/nic/update?system=dyndns&hostname=<h>&myip=<a>
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
url DDNS URL.
To Next Page
Loading...
Need help?
General
