Alcatel-Lucent OmniAccess 5740 - Clear Counters

L3 Interface Commands
Left running head:
Chapter name (automatic)
172
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLEAR COUNTERS
clear
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
clears the counters on a specific GigE interface.
PARAMETERS
None
EXAMPLE
ALU(config-if GigabitEthernet3/0)#clear
Clear counters on this interface [confirm]y
ALU(config)#
CLEAR COUNTERS
clear counters GigabitEthernet <slot/port>
(:subinterface_number)
DESCRIPTION
This command is entered in the Interface Configuration Mode or Configuration
Mode. This command clears the counters on a specific GigE interface.
PARAMETERS
EXAMPLE
ALU(config)# clear counters GigabitEthernet 3/0
Clear counters on this interface [confirm]y
ALU(config)#
Parameter Description
slot/port
(:subinterface_number)
This command clears the counters on
the GE interface.