Alcatel-Lucent OmniAccess 5740 - Match Ip Route-Source

match ip route-source
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
439
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
MATCH IP ROUTE-SOURCE
match ip route-source {<1-99>|<1300-2699>|<access-list
name>|prefix-list <prefix-list name>}
DESCRIPTION
This command is entered in the Route-Map Configuration Mode. This command
matches the address specified by the specified advertised access lists/prefix-lists.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-route-map)# match ip route-source 5
Parameter Description
1-99
Standard IP access list number or name. The list defines
which networks are to be received and which are to be
suppressed in routing updates.
1300-2699
Extended IP access list number or name. The list defines
which networks are to be received and which are to be
suppressed in routing updates.
prefix-list Distributes routes based on a prefix list.
access-list name Name of a specific access list.
prefix-list-name Name of a specific prefix list.