radius-server
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
89
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
RADIUS-SERVER
radius-server [vrf <vrf-name>] <ip-address> [{auth-port <0-
65535>|deadtime <1-1440>|key <string>|retransmit <1-
100>|timeout <1-1000>}]
DESCRIPTION
This command is entered in the RADIUS Server Group Configuration Mode.
This command is used to add the RADIUS server of the specified IP address to a
RADIUS server group.
PARAMETERS
EXAMPLE
ALU(config-srv-grp-rad1)# radius-server 1.1.1.1
Parameter Description
vrf-name Name of the VRF.
ip-address IP address of the remote RADIUS server
to be added to the group.
auth-port <0-65535> Destination port on which RADIUS
server is listening.
deadtime <1-1440> The time (in minutes) that should elapse,
before you try again to connect to a non-
responding server.
key <string> This is the encryption key between the
OmniAccess 5740 USG and the radius
server.
retransmit <1-100> Number of retries after each “timeout”
interval, before giving up on the server.
timeout <1-1000> Number of seconds that the
OmniAccess 5740 USG should wait for a
reply from the RADIUS server before
retrying.
To Next Page
Loading...
