Alcatel-Lucent OmniAccess 5740 - Option Bootfile-Name; Option Dns-Server

option bootfile-name
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
937
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
OPTION BOOTFILE-NAME
option bootfile-name <file-name>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the boot file for a host.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p1)# option bootfile-name boot_image
OPTION DNS-SERVER
option dns-server <ip-address> {primary|secondary|tertiary}
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the Domain Name Server IP address to be used by the
clients.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p1)# option dns-server 1.2.2.2 primary
Parameter Description
file-name Name of the Boot file for a host.
Parameter Description
ip-address IP address of the DNS.
primary|secondary|tertiary Specify the priority for the DNS.