neighbor remote-as
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
521
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NEIGHBOR REMOTE-AS
neighbor {<ip-address>|<peer-group-name>} remote-as <1-65535>
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
Configures a BGP neighbor and the AS to which this neighbor belongs.
PARAMETERS
DEFAULT
No neighbor configured.
EXAMPLE
ALU(config-router bgp AS30)# neighbor 1.1.1.1 remote-as 5000
NEIGHBOR REMOVE-PRIVATE-AS
neighbor {<ip-address>|<peer-group-name>} remove-private-as
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command removes the private AS numbers from the updates sent to the
neighbors. Private AS values are from 64512 to 65535.
PARAMETERS
DEFAULT
None.
EXAMPLE
ALU(config-router bgp AS30)# neighbor 1.1.1.1 remove-private-as
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
1-65535 Autonomous system to which the neighbor belongs.
Parameter Description
ip-address Neighbor’s IP address.
peer-group-name Name of a BGP peer group.
To Next Page
Loading...
Need help?
General
