Multicast Routing
Left running head:
Chapter name (automatic)
626
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP IGMP INTERFACE
show ip igmp interface [<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays all interfaces on which the IGMP is enabled, and displays
configured/default values of the IGMP interface parameters.
PARAMETERS
EXAMPLE
ALU# show ip igmp interface
GigabitEthernet3/0 Internet address 7.7.7.3 Mask 255.255.255.0
Host version 2 Router Version 2
Query Interval = 125
Querier Timeout = 255
Max query response time = 10
Last member query count = 2
Last member query response time = 1000
Access Group set = 0
Number of joins on this interface = 84
Number of leave message on this interface = 7
Querier on this interface = 7.7.7.3
Interface DR is 7.7.7.3
Total groups on this interface 1
Group 1 224.1.1.1
Parameter Description
interface-name Displays IGMP interface parameters for specified interface.
To Next Page
Loading...
