Alcatel-Lucent OmniAccess 5740 - Neighbor Version; Neighbor Weight

Border Gateway Protocol
Left running head:
Chapter name (automatic)
528
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NEIGHBOR VERSION
neighbor {<ip-address>|<peer-group-name>} version <4-4>
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
configures neighbor’s BGP version.
PARAMETERS
DEFAULT
BGP Version 4.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 version 4
NEIGHBOR WEIGHT
neighbor {<ip-address>|<peer-group-name>} weight <0-65535>
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command sets the default weight for the routes from a neighbor.
PARAMETERS
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 weight 500
Parameter Description
ip-address IP address of the BGP-speaking neighbor.
peer-group-name Name of a BGP peer group.
4-4 BGP version number. This is always set to 4.
Parameter Description
ip-address IP address of the BGP-speaking neighbor.
peer-group-name Name of a BGP peer group.
0-65535 Default weight assigned to the routes from this neighbor.