Alcatel-Lucent OmniAccess 5740 - Show Auto Qos

show auto qos
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
909
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW AUTO QOS
show auto qos {<interface-name> [diff-serv|voip]|diff-
serv|statistics [<interface-name>]|voip}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays all/any Auto QoS configuration. You can view the Auto QoS
configuration for a specific interface. The output of this command is a list of all the
Auto QoS policies, and traffic classes. This command also displays the Auto QoS
statistics on all the interfaces or a specific interface.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show auto qos diff-serv
auto qos diff-serv
class autoqos-class-af1
match ip any any dscp af11
match ip any any dscp af12
match ip any any dscp af13
bandwidth percent 20
queue-limit 350
random detect ip-dscp af11 min-threshold 200 max-threshold 300
random detect ip-dscp af12 min-threshold 150 max-threshold 300
random detect ip-dscp af13 min-threshold 100 max-threshold 300
random-detect ip-dscp
class autoqos-class-af2
match ip any any dscp af21
match ip any any dscp af22
match ip any any dscp af23
bandwidth percent 20
queue-limit 350
random detect ip-dscp af21 min-threshold 200 max-threshold 300
random detect ip-dscp af22 min-threshold 150 max-threshold 300
random detect ip-dscp af23 min-threshold 100 max-threshold 300
random-detect ip-dscp
class autoqos-class-af3
match ip any any dscp af31
Parameter Description
interface-name Displays the auto QoS configuration for
a specified interface.
diff-serv Displays the Auto QoS diff-serv
configuration.
voip Displays the Auto QoS VoIP
configuration.