Alcatel-Lucent OmniAccess 5740 - Save Logging File Name; Save Logging Priority

save logging file name
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
97
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SAVE LOGGING FILE NAME
save logging filename {fpkey:|user:}
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
save the log messages with the file name provided in the front-panel USB or
entered by the user in the user area.
PARAMETERS
EXAMPLE
ALU# save logging filename user:logs
This saves the log messages to a file named logs in the ALU user area.
SAVE LOGGING PRIORITY
save logging priority [<0-7>|alerts|critical|debugging|
emergencies|errors|informational|notifications|warnings]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
save the log messages of the specified priority and higher.
PARAMETERS
EXAMPLE
ALU# save logging priority 5
This saves all log messages of priority warning (= 4) and higher. i.e. all messages
from (0 -4) priorities are stored.
By default, messages up to informational level (= 6) are stored.
ALU# save logging priority 5 exact
This saves log messages with priority equal to 5.
Parameter Description
fpkey:|user: Name of the file under which you can
save the log messages.
Parameter Description
0-7 Priority of the log messages to be saved.