Alcatel-Lucent OmniAccess 5740 - Redistribute

Protocol Independent Features
Left running head:
Chapter name (automatic)
444
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
REDISTRIBUTE
The following command is used to redistribute routes to OSPF.
redistribute {connected|static|bgp <1-65535>|ospf <1-
65535>}[metric <0-16777214>|metric-type <1-2>|route-map
<name>|tag <0-4294967295>|subnets]
The following command is used to redistribute routes to RIP.
redistribute {bgp <1-65535>|connected| ospf <1-65535> [match
{{external|nssa-external}[1|2]|internal}]|static} [metric
{<1-16>|transparent}| route-map <name>]
The following command is used to redistribute routes to BGP.
redistribute {{connected|static|rip} [metric <0-
4294967295>|weight <0-65535>|route-map <name>]|ospf <1-
65535> [match [
external [type1|type2] |internal|nssa-
external [type1|type2]] metric <0-4294967295>|weight [0-
65535]|route-map <name>]}
DESCRIPTION
This command is entered in the Router Configuration Mode.
PARAMETERS
Parameter Description
connected Redistribute the connected routes.
static Redistribute the static routes.
bgp <1-65535> If Redistribute is configured for RIP/OSPF, BGP routes are
redistributed to RIP/OSPF.
ospf <1-65535> If Redistribute is configured for BGP/RIP/OSPF, OSPF
routes are redistributed to BGP/RIP/OSPF.
In case of OSPF, source protocol process ID and
destination protocol process ID should not be same.
metric-type <1-
2>
Redistributed routes metric type.
route-map <name> Use route map for route filtering and modifying attributes of
the routes.
tag <0-
4294967295>
Specified tag is assigned to redistributed routes.
subnets Redistribute only subnet routes.
external [1|2] Redistribute route if route is external type 1 or type 2.