show ppp all configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
303
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW PPP ALL CONFIGURATION
show ppp all configuration Serial <slot/port:channel>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays all the PPP configuration information for a specified interface.
PARAMETERS
EXAMPLE
ALU# show ppp all configuration Serial 0/0:0
LCP Max Echoes : 5
LCP Echo Interval : 60 (sec)
LCP Restart Interval : 30 (sec)
IPCP pool IP address : 50.51.52.54
IPCP local IP address from peer: Reject
IPCP peer IP address : Reject
PPP Restart timer : 3 (sec)
PPP Max Terminate : 2
PPP Max Configure : 10
PPP Max Failure : 5
Authentication protocol : pap
Authentication username : user1
Authentication password : secret1
Authentication client-username : user2
Authentication client-password : secret2
Parameter Description
<slot/port:channel> The interface name with the slot and port
numbers.
To Next Page
Loading...
Need help?
General
