Alcatel-Lucent OmniAccess 5740 - Show Ip Pim Neighbor

show ip pim neighbor
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
617
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP PIM NEIGHBOR
show ip pim neighbor [<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays PIM neighbors on all interfaces. To see neighbors on a specific
interface, use the interface name.
PARAMETERS
EXAMPLE
ALU#show ip pim neighbor
PIM Neighbor Table
Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode
8.8.8.8 Serial0/0:0 00:09:33/00:01:39 v2 1/ DR
6.6.6.7 Serial0/1:0 00:09:45/00:01:33 v2 1/ DR
ALU#
ALU# show ip pim neighbor Serial 0/0:0
PIM Neighbor Table
Neighbor Interface Uptime/Expires Ver DRAddress Prio/Mode
8.8.8.8 Serial0/0:0 00:09:43/00:01:33 v2 1/ DR
ALU#
Parameter Description
interface-name Name of the interface.