Alcatel-Lucent OmniAccess 5740 - No Match; No Peer; No Pfs; No Proposal

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
780
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO MATCH
no match <matchlist-name>
This command is entered in the Crypto Map Configuration Mode. This command
detaches the specified match-list attached to a crypto map.
NO PEER
no peer {<ip-address>|<FQDN>}
This command is entered in the Crypto Map Configuration Mode. This command
detaches the specified peer attached to a crypto map.
Note: You cannot delete a peer from the crypto map if the crypto map is attached to an
interface.
NO PFS
no pfs
If this command is entered in the IKE Policy Configuration Mode, this command
resets the PFS Group to its default.
If this command is entered in the Crypto Map Configuration Mode, this command
disables PFS completely.
NO PROPOSAL
no proposal
This command is entered in the IKE Policy Configuration Mode. This command
deletes the proposal configured for the IKE policy, and resets the IKE policy to its
default.
NO TRANSFORM-SET
no transform-set
This command is entered in the Crypto Map Configuration Mode. This command
detaches the specified transform-set attached to a crypto map, and applies the
'default' transform set.
Note: A transform-set must be first detached from the crypto map to delete it globally.