Open Shortest Path First
Left running head:
Chapter name (automatic)
554
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
AREA STUB
area {<0-4294967295>|<ip-address>} stub [no-summary]
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
defines an area to be a stub area.
PARAMETERS
DEFAULT VALUE
No stub area is defined.
EXAMPLE
ALU(config-router ospf 30)# area 1 stub no-summary
Parameter Description
0-4294967295 Identifier for the OSPF stub area as a decimal value.
ip-address Identifier for the OSPF stub area as an IP address.
no-summary Prevents an ABR from sending summary link
advertisements into the stub area.
To Next Page
Loading...
Need help?
General
