Alcatel-Lucent OmniAccess 5740 - Policy Based Routing (PBR)

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
70
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
LOGGING RATE-LIMIT UNIQUE
logging rate-limit unique
DESCRIPTION
This command is entered in the Configuration Mode. This command restores the
default setting and enables logging of unique messages.
PARAMETERS
None.
EXAMPLE
ALU(config)# logging rate-limit unique
LOGGING RATE-LIMIT NO UNIQUE
logging rate-limit no unique
DESCRIPTION
This command is entered in the Configuration Mode. This command restricts the
number of messages in a given interval to that specified in the rate-limiting
command and prevents logging of unique messages.
By default, rate limiting does not prevent unique messages from being logged. If
the number of messages does not exceed the number specified in the rate limiting
command, the unique messages will continue to be logged.
No preference is given to unique messages with this command.
PARAMETERS
None.
EXAMPLE
ALU(config)# logging rate-limit no unique