neighbor peer-group (creating)
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
519
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NEIGHBOR PEER-GROUP (CREATING)
neighbor <peer-group-name> peer-group
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command is used to create BGP peer group.
PARAMETERS
DEFAULT
By default, there is no BGP peer group.
EXAMPLE
ALU(config-router bgp AS30)#neighbor testpeergroup peer-group
Parameter Description
peer-group-name Name of the BGP peer group.
To Next Page
Loading...
Need help?
General
