Border Gateway Protocol
Left running head:
Chapter name (automatic)
526
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NEIGHBOR UNSUPRESS-MAP
neighbor {<ip-address>|<peer-group-name>} unsupress-map <route-
map-name>
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command enables BGP routers to selectively advertise routes previously
suppressed by the ‘aggregate-address’ command.
PARAMETERS
DEFAULT VALUE
If aggregate-address command is configured, only then the aggregate routes are
advertised.
EXAMPLE
ALU(config-router bgp AS30)#neighbor 1.1.1.1 unsupress-map r1
Parameter Description
ip-address IP address of the BGP-speaking neighbor.
peer-group-name Name of a BGP peer group.
route-map-name Name of the route map.
To Next Page
Loading...
