Alcatel-Lucent OmniAccess 5740 - Show Dot1 X Statistics

802.1X Port-Based Authentication
Left running head:
Chapter name (automatic)
226
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW DOT1X STATISTICS
show dot1x statistics [{all|interface switchport <slot/port>}]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to display the 802.1X statistics of all switchports or of a
particular switchport.
PARAMETERS
EXAMPLE
show dot1x statistics interface switchport 5/0
------------------------------------
802.1X is enabled on switchport5/0
Rx: EAPOL EAPOL EAPOL EAPOL EAP EAP EAP
start Logoff Invalid Total Resp/ID Resp/oth LenError
5 1 0 16 5 5 0
Last Last
EAPOLVer EAPOLSrc
2 00.0D.62.2B.76.FA
Tx: EAPOL EAP EAP
Total Req/ID Req/oth
23 5 10
Parameter Description
all Displays the 802.1X statistics of all the
switchports.
interface switchport <slot/
port
Displays the 802.1X statistics of a
particular switchport.