Alcatel-Lucent OmniAccess 5740 - Show Ip Ospf Retransmission-List

show ip ospf retransmission-list
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
597
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP OSPF RETRANSMISSION-LIST
show ip ospf [<1-65535>] retransmission-list [neighbor-router-
id] [<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays a list of all LSAs waiting to be re-sent.
PARAMETERS
EXAMPLE
ALU# show ip ospf retransmission-list
OSPF Router with ID (1.1.1.2) (Process ID 1)
Neighbor 1.1.1.1, interface GigabitEthernet 3/0 address 1.1.1.2
Link state retransmission due in 4 sec, Queue length 0
Type LS ID ADV RTR Seq NO Age Checksum
Neighbor 6.6.6.6, interface GigabitEthernet 3/1 address 2.2.2.2
Link state retransmission due in 0 sec, Queue length 1
Type LS ID ADV RTR Seq NO Age Checksum
3 1.1.1.0 1.1.1.2 0x80000001 2 0x69AA
ALU#
Parameter Description
1-65535 Process ID. If this argument is included,
only information for the specified routing
process is displayed.
neighbor-router-id (Optional) Neighbor router ID.
Displays the list of all LSAs waiting to be
resent for this neighbor.
interface-name Displays the list of all LSAs waiting to be
resent on a specified interface.