Alcatel-Lucent OmniAccess 5740 - Clear Ip Traffic

Virtual Routing and Forwarding
Left running head:
Chapter name (automatic)
644
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLEAR IP TRAFFIC
clear ip traffic [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command clears counters of IP traffic statistics.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# clear ip traffic vrf ALU-vrf
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
vrf-name Clears counters of IP traffic statistics in a
specified VRF.