Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Filter and Firewall
Left running head:
Chapter name (automatic)
704
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW L2 FILTER STATISTICS
show l2 filter statistics [<name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the statistics of all the L2 filters configured on the system.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show l2 filter statistics
l2 filter F1
default deny Hits 0
interface GigabitEthernet3/0 In
top
!
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
name If a L2 filter name is specified, it displays
the statistics for the specified filter.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English