Alcatel-Lucent OmniAccess 5740 - No Auto-Summary; No Default-Information Originate; No Default-Metric; No Distance

Router Information Protocol
Left running head:
Chapter name (automatic)
474
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO AUTO-SUMMARY
no auto-summary
This command is entered in the Router Configuration Mode. The ‘no’ command
disables auto-summary, and sends sub-prefix routing information across classfull
network boundaries.
NO DEFAULT-INFORMATION ORIGINATE
no default-information originate
This command is entered in the Router Configuration Mode. This command
disables the control distribution of default information.
NO DEFAULT-METRIC
no default-metric <1-16>
This command is entered in the Router Configuration Mode. This command sets
the metric of redistributed routes to its default.
NO DISTANCE
no distance <1-255>
This command is entered in the Router Configuration Mode. This command sets
the administrative distance to default. The default value for RIP is 120.
NO DISTRIBUTE-LIST
no distribute-list {<1- 99>|<1300-2699>|gateway <ip-prefix-list
name>|prefix <ip-prefix-list name>} {in|out} [<interface-name>]
This command is entered in the Router Configuration Mode. This command
disables the functionality to filter networks in routing updates.
NO IP RIP AUTHENTICATION KEY-CHAIN
no ip rip authentication key-chain <key-chain name>
This command is entered in the Interface Configuration Mode. The ‘no’ command
removes the key chain associated to an interface. This disables RIP
authentication.
NO IP RIP AUTHENTICATION MODE
no ip rip authentication mode
This command is entered in the Interface Configuration Mode. The ‘no’ command
sets the authentication mode to its default, i.e, plain Text authentication.