Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

no snmp-server user
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
79
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO SNMP-SERVER USER
no snmp-server user <user-name>
This command is entered in the Configuration Mode. This command deletes a
SNMPv3 user.
NO SNMP-SERVER VIEW
no snmp-server view <view-name> <MIB-family-name>
This command is entered in the Configuration Mode. This command deletes a
view.
NO SNMP SYSTEM
no snmp system {contact|location|name}
This command is entered in the Configuration Mode. This command removes the
specified SNMP system details.
NO SNMP TRAP
no snmp trap <ip-address> {v1|v2c} <1-65536> vrf <vrf-name>
This command is entered in the Configuration Mode. This command removes the
SNMP trap configuration.
NO SNMP TRAP ENABLE
no snmp trap enable
This command is entered in the Configuration Mode. This command disables
sending the SNMP traps to the configured host.
NO TACACS-SERVER
no tacacs-server <ip-address>
This command is entered in the TACACS+ Server Group Mode. This command
removes a TACACS+ Server from the server group.
NO TACACS-SERVER AUTH-PORT
no tacacs-server auth-port
This command is entered in the Configuration Mode. The ‘no’ command deletes
the global TACACS+ auth-port from the configuration, and resets it to default (for
all servers that do not have a server specific port).
NO TACACS-SERVER KEY
no tacacs-server key
This command is entered in the Configuration Mode. The ‘no’ command deletes
the global TACACS+ key from the configuration, and resets it to default (for all
servers that do not have a server specific key).

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English